CutList Optimizer Alternative

If you use CutList Optimizer (cutlistoptimizer.com) and want to try another cutlist optimiser in your browser, this page sets out what we could verify about both tools, including what CutList Optimizer does that our optimizer doesn’t.

▶ Open the optimizer

By The optimizadordecorte.app Team · Last updated:

What we could verify about CutList Optimizer

CutList Optimizer (cutlistoptimizer.com) does not publish prices, plan limits or a FAQ on a public page. Its website is the app itself, so this table lists only what the app’s settings and its Android listing show.

CutList Optimizer
PlatformWeb app, plus an Android app on Google Play
Grain directionA setting in the app
Edge bandingA setting per panel in the app
Several stock sheets in one calculationA setting in the app
Prices, free tier and plan limitsNot published on a public page

Our side in brief: optimizadordecorte.app runs in the browser with no account to start, in millimeters or inches with fractions to 1/16 in, and uses one sheet size per calculation. Our full row, next to seven other optimizers, is in the cut list optimizer comparison table.

What CutList Optimizer does that our optimizer doesn’t

Where our tool may fit better

Try the same list in both

The fairest test is your own job. Enter the same sheet size, kerf, trim margin and grain settings in both tools and compare the sheets used. Our benchmark page has a 15-part list as CSV and our own results, if you want a ready-made list.

Moving a list from CutList Optimizer

We could not confirm from its public pages whether CutList Optimizer exports a parts list as a file, so the simplest route is a spreadsheet:

  1. Put the parts in four columns, in this order: name, width, height, quantity. One part per row.
  2. Copy the rows and paste them into Import CSV in our optimizer. Commas, semicolons and tabs all work as separators, so cells copied straight from a spreadsheet paste as they are.
  3. A header row is skipped, because its width and height are not numbers. A row with no quantity counts as 1.
  4. For inches, switch the mm | in toggle first and type fractions such as 23 1/4. If the sizes look like millimeters, the optimizer asks which unit you meant.
  5. Imported parts have grain switched off. Tick grain on the parts that need it before you calculate.

How we checked

We opened the CutList Optimizer web app and read its Android listing on November 10, 2026, and recorded only the settings they show; there is no public pricing, plans or FAQ page to cite. Facts about our own tool come from our code and plan settings. We make optimizadordecorte.app, so treat this as a vendor comparison rather than an independent review.

Pages checked: the CutList Optimizer web app and its Android app listing.

CutList Optimizer is a separate product with no connection to us; we use its name only so you can recognize it.

Try it with one of your parts lists

Paste the list you already use in CutList Optimizer and compare the sheets each tool needs. No sign-up needed to start.

▶ Open the optimizer

FAQ

Is optimizadordecorte.app the same as CutList Optimizer?

No. They are separate products from different makers. Both are cut list optimizers that run in the browser.

Is there a free cutlist optimiser without registration?

Yes. You can calculate on optimizadordecorte.app without an account. CutList Optimizer’s public pages don’t say whether it needs one.

Can I use several sheet sizes in one calculation?

Not in our optimizer: it uses one sheet size per calculation. CutList Optimizer’s app has a setting for several stock sheets.

Does your optimizer handle edge banding?

No. Only the 3D furniture configurator records edge banding, in its PDF and DXF files.

Written by the team behind optimizadordecorte.app — learn more about how the tool works.